Warm bronze tint that rejects sun heat and softens glare
A bronze tinted residential film that pairs mid-level daylight with strong infrared rejection.
NorthGuard installs Madico Solar Bronze in its lighter shade for Toronto and GTA homes and offices that want a warm bronze tone along with heat control. The tint suits wood, brick and brass finishes better than grey.
On-site check and written quote · Mobile service across Toronto and the GTA
- Visible light transmitted
- 35%
- Total solar energy rejected (TSER)
- 62%
- Glare reduction
- 61%
Madico's published typical values, measured on single-pane 6 mm clear glass. Full specifications and sources
The heat and glare problem Solar Bronze 35 answers
Madico Solar Bronze 35 is for glass that lets in more sun, heat or glare than the room can use. Grey films can feel cold against wood, brick and brass interiors. Rooms with large sun-facing glass also overheat. The aim is to calm the heat without a flat, steel-coloured look.
How Solar Bronze 35 cuts heat and glare
Solar Bronze 35 transmits 35% of visible light and rejects 62% of total solar energy. Infrared rejection is 87%, SHGC is 0.38 and glare reduction is 61%. The UV figure on Madico's table is 99% or higher.
Where Solar Bronze 35 fits best
NorthGuard suggests Madico Solar Bronze 35 for jobs like these.
- Homes with warm finishes where a bronze tone suits wood, brick or brass better than grey.
- Sun-baked rooms, since infrared rejection is 87% and the SHGC is 0.38.
- Spaces that want daytime privacy, as 18% of visible light reflects off the outer face.
- Offices and condos with screen glare, where 61% glare reduction helps.
What Solar Bronze 35 will not do
Madico Solar Bronze 35 has limits that NorthGuard states before any quote.
- The bronze tint shifts how colours look inside, so the film samples NorthGuard shows at the on-site check are worth seeing first.
- The film absorbs 52% of solar energy, so glass type should be checked before install.
- An 18% outside reflection gives a slightly mirrored look in daylight.
Get a Solar Bronze 35 quote from NorthGuard
NorthGuard checks your glass on site, confirms that Solar Bronze 35 suits it and sends a written quote.
Solar Bronze 35 specifications from Madico
Madico publishes these values for Madico Solar Bronze 35, part SB 35 DA SR.
| Property | Madico value | Source |
|---|---|---|
| Visible light transmitted | 35% | 1 |
| Visible light reflected external | 18% | 1 |
| Visible light reflected internal | 24% | 1 |
| Glare reduction | 61% | 1 |
| Total solar energy transmitted | 24% | 1 |
| Total solar energy reflected external | 24% | 1 |
| Total solar energy absorbed | 52% | 1 |
| Shading coefficient (SC) | 0.44 | 1 |
| Solar heat gain coefficient (SHGC) | 0.38 | 1 |
| U factor | 0.91 | 1 |
| UV rejection | ≥ 99% | 1 |
| Emissivity | 0.62 | 1 |
| Light to solar gain | 0.90 | 1 |
| Total solar energy rejected (TSER) | 62% | 1 |
| IR rejection | 87% | 1 |
| Infrared energy rejection (IRER) | 68% | 1 |
| Test basis | Read per NFRC standards, calculated on single pane 6 mm (1/4 in) clear glass; typical properties, not a specification | 1 |
- Madico PDF: Architectural film performance measurements
- Madico page: Solar bronze
- Madico page: Glossary
Optical values are Madico's published typical values, measured on single-pane 6 mm clear glass, so results on your own glass can differ.
Solar Bronze 35 questions and answers
NorthGuard answers these questions about Madico Solar Bronze 35 with Madico's published data.
What colour is Solar Bronze 35?
Solar Bronze 35 is a bronze tinted film in Madico's own description. It lets 35% of visible light through, so expect a visible bronze tone in the room. Film samples shown at the on-site check are the safest way to judge it.
How much heat does Solar Bronze 35 reject?
Madico lists total solar energy rejected at 62%, infrared rejection at 87% and a solar heat gain coefficient of 0.38. The shading coefficient is 0.44. Values are typical for single pane 6 mm clear glass.
How does glare reduction compare with heat rejection on Solar Bronze 35?
Solar Bronze 35 reduces glare by 61%, which sits close to its 62% total solar energy rejection. Visible light transmitted is 35%.
Does Solar Bronze 35 give privacy?
Solar Bronze 35 reflects 18% of visible light off the outside face, which gives some daytime privacy. After dark with lights on inside, that effect fades. Madico says the reflective properties of the Solar Bronze line enhance daytime privacy while keeping natural light.
Madico Solar Bronze 35 for Toronto sun and glare
NorthGuard installs Madico Solar Bronze 35 on Toronto glass that takes strong afternoon sun, from condo towers to south-facing living rooms. NorthGuard checks which way the glass faces and how the room is used before recommending a shade.
NorthGuard comes to you in Yorkville, CityPlace, Davisville and Yonge and Eglinton: neighbourhoods known for condo and apartment towers with large glass walls. Mobile service covers the rest of Toronto and the GTA, with no showroom.
Madico Nova 70, our premium option
Madico Nova 70 is our premium option when a room should stay brighter than Solar Bronze 35 leaves it: Madico lists Nova 70 at 68% visible light transmitted, against 35% for Solar Bronze 35, with 46% of total solar energy rejected.
The Nova promotion (ends December 31, 2026): 30% off supplied and installed, from 50 sq ft of glass.
See Nova 70, our premium optionMore solar tint films from NorthGuard
NorthGuard also installs the other films in this Madico range, and each one has its own page.
All Madico films NorthGuard installsSolar window film in Toronto
Madico is a trademark of Madico, Inc. Warranty details on request. NorthGuard buys Madico film as a customer and is not a Madico dealer.
